Netatmo public weather| Provides weather values from the surroundings without an own weather station: many owners of a
Netatmo weather station share their measurements publicly. The block takes all these stations
within the configured radius and forms the median for each quantity. Single stations placed in the
sun or on a house wall therefore hardly distort the result. The wind direction is an average of
the directions weighted by wind strength. Only the block Netatmo account with a Netatmo sign-in is needed, own Netatmo devices are not required. The data is queried every 10 minutes, which costs one request per area. Only measurements at most two hours old are used. »Number of stations« shows how many stations contributed. In sparsely populated areas it may be necessary to enlarge the radius. If no station within the radius shares a rain or wind gauge, these outputs do not change. |
Outputs |
||
| TE |
Temperature |
Outdoor temperature in °C, median of the stations. |
| FE |
Humidity |
Relative outdoor humidity in %. |
| LD |
Air pressure hPa |
Air pressure reduced to sea level in hPa. |
| R1 |
Rain last hour mm |
Rainfall of the last hour in mm, from the stations with a rain gauge. |
| RT |
Rain 24 hours mm |
Rainfall of the last 24 hours in mm. |
| WS |
Wind speed km/h |
Average wind speed in km/h, from the stations with an anemometer. |
| WR |
Wind direction ° |
Wind direction in degrees (0 = north, 90 = east). |
| WB |
Gust km/h |
Strongest gust in km/h. |
| AS |
Number of stations |
Number of stations within the radius that contributed current values. 0 = no station found. |
| DA |
Data current |
1 = Netatmo renewed the values within the timeout. 0 = no data since start, account not signed in, no location or timeout expired. |
Parameters |
||
| Account |
Optional. The Netatmo account block used for the queries. The selection is only shown when the project contains several accounts. Not set: the first account in the project. |
|
| Latitude |
Centre of the area in degrees, e.g. 47.07. Comma or point. Empty: the location from the project settings. |
|
| Longitude |
Centre of the area in degrees, e.g. 15.44. Empty: the location from the project settings. If both are missing, the block shows »Location?« and provides no values. |
|
| Radius |
Radius of the area in km, 1 to 30, default 5 km. |
|
| Timeout data outdated |
If no new data arrives from Netatmo within this time (minutes), »Data current« drops to 0. The other outputs keep their last known value. 0 = never outdated. Default 30 min. |
|