General
parametersThe properties window first shows the entries that every control element has, below them the parameters of the respective element. Not every entry appears with every element – the text alignment for instance only where text is displayed.
Page, default parameters and element |
|
| Page | The button Properties... opens the dialog with all properties of the visu page, see Properties Page. It can also be used when no control element is selected at all. |
| Default parameters | The button save remembers the current settings as the default for new control elements of the same type. Stored are transparency, background, text alignment, offset, zoom, width and height as well as the parameters of the element. The defaults apply to all projects, they are kept on the computer and not in the project. |
| Element | With lock the control element can no longer be moved or resized with the mouse. Handy for background elements that you otherwise keep catching while working. Through the fields size/position it stays changeable. |
Transparency |
|
| Transparency | Slider and input field, range 0 to 100. 100 means not transparent, 0 completely transparent. Depending on the control element not all parts are displayed transparently: with the element Text static for instance the background becomes see-through, but the text does not. |
| Background | If the box is ticked, the background area of the control element is drawn. Without the tick it stays completely free, so the page shows through – independently of the transparency. |
Size/position |
|
| Position X / Position Y | Position of the upper left corner in pixels. The value refers to the page size before the zoom factor is applied. |
| Width / Height | Size of the control element in pixels, also before the zoom factor. |
Text alignment (visible depending on the control element) |
|
| Horizontal | Left, centred or right. |
| Vertical | Top, middle or bottom. |
| Offset X / Offset Y | Moves the text away from that alignment, given in percent of the width respectively height of the control element. Negative values move to the left respectively upwards. Because the value is a percentage, the text sits in the same place on every screen. |
| Zoom type |
|
| Zoom value | Zoom factor in percent, 0 to 200. It allows the calculated font size to be adjusted. |
Frame |
|
| Type |
|
| Line | Thickness of the frame line. 0 means no frame. |
| Round corners | Rounds the corners, given in percent of the shorter side of the control element (0 to 100). The row only appears with elements that support rounded corners. |
| Colour | Frame colour. The flat and the raised frame each have their own colour. |
| Left, Right, Top, Bottom | Only with the type Flat: here it is set on which side the frame is drawn. That way only a separating line at the bottom can be shown, for instance. |
General |
|
| Title | Title of the page |
| Symbol | Symbol of the page: a symbol of the program or an SVG graphic
imported into the project, coloured to match the style in the new design. The button
opens the symbol selection, x removes the symbol. It is shown in the navigation
inside the page frame and on control elements without a symbol of their own: in the
Block header bar of this page and on Block page call and in the
Block menu bar leading to this page. A symbol chosen on the control element
always takes precedence. It is quicker with the right mouse button in the navigation
or on a free spot of the page: Choose page symbol ... or
Remove page symbol. Without a symbol everything stays as before. |
| Orientation |
|
| Show grid | Shows a grid while editing the page as a placement aid for the block controls. The setting also defines the view that newly added block controls on this page are preset to: without grid with a header, or with grid without a header. The view can be changed individually on every control. |
| Columns / Rows | Number of tiles of the grid. The tiles are square and fill the width of the page between a margin of 8 pixels. Vertically they are centred between the header and the footer. |
| Header / Footer | Height of the header and the footer as a percentage of the page height. A newly added "Block page header" or "Block page footer" control gets this height, all other block controls the size of one grid tile. |
| Snap grid | Step size in page pixels a control snaps to when it is moved or resized. 0 switches snapping off. When the tile size of the grid changes, the value is scaled by the same ratio so that a block control still lies exactly on a tile. Projects that do not know this setting yet use the value that was set globally so far. |
| Transfer to pages | Transfers the grid of this page (show grid, columns, rows, header and footer, snap grid) to all or selected other pages. |
| Allow zoom | Allows the page to be enlarged on the target device with two fingers. |
| Lock swiping to other pages | Swiping from this page to other pages is not possible, for example on a single page opened by a page jump. Page jumps, footer and menu bar still change the page when tapped. Default is off. |
| Expand page to full screen | The page uses the entire screen area instead of being fitted proportionally. The page images follow their own settings "Zoom to page" and "Zoom proportional" - a background image without "Zoom proportional" therefore reaches the edge of the screen and covers the otherwise black borders. The controls remain proportional and centred, exactly as the page was created. The effect is only visible on the target device, nothing changes in the editor. |
| Stretch controls as well | Only effective if the page is
expanded to the full screen. Defines what the controls are aligned
to. Their aspect ratio is preserved in every case, a round element
stays round.
|
| Enlarge controls as well | Only effective if the controls are stretched. Without this option they keep their size and only the spacing between them grows. With the option they grow undistorted with the gained area; controls placed close together may move into each other. |
| Address page visible | Address in the format x/x/x which is set to 1 as soon as the page becomes visible and to 0 when the page is left. |
| Transfer to pages | Transfers the general settings of this page (allow zoom, lock swiping, expand page, stretch controls, address) to all or selected other pages. Title and orientation remain unchanged on the target pages. |
Size |
|
| width / height | Here you can set the height and width in pixels, but this is only used to determine the aspect ratio. If the target device has a higher or lower resolution, it will always scale into the available range without distortion. |
| Proportional | If this option is active, the width
is always changed correctly in aspect ratio when the height is
changed. |
| width / height (hidden area) | Enlarges the working area in the editor beyond the page size. Controls can be parked there without being visible on the target device. |
| Transfer to pages | Transfers the size of this page to all or selected other pages. |
Colour |
|
| Background | Here you can specify the color for
the background. |
| Frame | Colour of the borders that appear when the target device has a different aspect ratio than the page: same as the page colour, or black. If the page is expanded to the full screen, these borders are no longer visible. |
| Transfer to pages | Transfers the colours of this page to all or selected other pages. |
Background image / Overlay image |
|
| A page can show two images on top of each other. The background image lies behind the controls, the overlay image above them. Both areas have the same settings and are independent of each other. A typical setup is a wallpaper as background and a transparent floor plan as overlay. | |
| Image | Selection of the graphic,
see Graphic Import If the graphic is an SVG whose lines are drawn with the colour currentColor (for example the floor plans from the GDAS Manager), the lines appear in the font colour of the selected style - dark in the light design, light in the dark design. If the font colour hardly stands out from the page background, black or white is used instead. |
| Horizontal / Vertical | Alignment of the image on the page.
Only effective as long as the image does not fill the page
completely. |
| Zoom to page | With this option the image is scaled
to the page size. Without the option it is shown in its original
size. |
| Zoom proportional | With this option the image keeps its
aspect ratio and is fitted without distortion; borders may remain
free. Without the option it is stretched over the entire page area.
This is exactly how a background image is stretched across the whole
screen together with the option "Expand page to full screen". |
| Offset X / Offset Y | Moves the image by a percentage of its own width or height. |
| Factor width / Factor height | Additional enlargement or reduction of the image in percent. |
| Common factor | If this option is active, factor width and factor height are always changed together. |
| Transfer to pages | Transfers the image of this page including alignment, zoom and offset to all or selected other pages. |